最簡單升級到1.1.3 & 破解(使用Installer 破解)
原文: http://iphone.i-bloog.com/read-56.html
更快更方便方法請看:http://iphone.i-bloog.com/read-61.html
此方法是透過 Installer 進行的，
建議從新Restore 1.1.1 開始～升到1.1.2 再升到 1.1.3
或者先刪除1.1.2 已安裝的軟件 :)
你需要的設備如下：
- Jailbroken and activated 1.1.2 iPhone
- Wi-Fi
- Auto-Lock set to never
- Installer (v3.0 或以上)
- BSD subsystem (v. 2.0 或以上)
- OpenSSH
- Official 1.1.3 upgrader using Installer through Conceited SW repository (目前版本: 1.1.3-3)
破解流程如下：
Installer > System > Official 1.1.3 Upgrader
安裝完成後，按HOME，桌面會多了一個 Upgrade的icon
點擊後，按 YES
就會自動從 Apple 網站下載1.1.3 的Firmware
完成後，畫面會變黑和重新開機，但這次開機會較長時間，大約１分鐘
當你見到Slide to Unlock 恭喜你，你已經是1.1.3 Jailbroken 
Known issues status list:
- 直接由Apple下載會很慢
Fixed in version 1.1.3-2
你有３個選擇可以在升級1.1.3前做:
- 由Installer 自動下載 1.1.3 Firmware
- 在電腦下載iPhone1,1_1.1.3_4A93_Restore.ipsw 後，放到iPhone的 /var/root/Media，會在iPhone內 Decompress
- 把022-3743-100.dmg(already decompressed)，放到iPhone的 /var/root/Media
選擇２或者 ３會加快進程!
- System Partition WRONG SIZE
Fixed - in Version 1.1.3-2
- iTunes 同步問題
Fixed - in version 1.1.3-2
Syncfix script from Dev Team has now been included
- 清理進程完成後的殘餘檔案
Fixed - in version 1.1.3-2
- Launchctl 正常運作
Fixed - in version 1.1.3-3
- EDGE
Working - in 1.1.3-3
- YouTube
Working - in 1.1.3-3
但仍有人在1.1.3-3 不能使用 YouTube
- Google Maps 定位
Working
只在安裝及運行 LocateMe 或者 Navizon (WHY? Good question… any clue?)
- 不能改變時區
仍有問題
Workaround possible:
http://george.zjlotto.com/index.php/…ak-113-issues/
- SMS 顯示不順序
仍有問題
This is an known bug from Apple. No fix yet.
Workaround possible:
Make sure iPhone is setup to receive the network time. Choose General > Date & Time and turn Set Automatically to ON.
(Note that in some locations, network time may not be available and in some cases, you may not see this option)
- Summerboard
Available for 1.1.3
- Customize
Available for 1.1.3
尚未測試
Thanks http://hackint0sh.org/forum/showthread.php?t=27138
Loading ...
March 10th, 2008 at 12:17 pm
my 8GB iPhone is 1.1.2 unlocked(activated) and jailbroken was bought from citylxxk;
can I just simply download this “Official 1.1.3 Upgrader”
for upgrading from 1.1.2 to 1.1.3, which is unlocking and jailbreaking?
What if I leave the installed softwares then directly upgrading my iPhone?
Anything will happen?
Because I am not sure whether I need to uninstall the softwares which are already existed since I bought my iPhone.
Thanks very much for your help! : )
iphone reply on March 10th, 2008:
建議用 ziphone / iplus 來破解:)
Stanley reply on March 10th, 2008:
因為我買8GB 1.1.2 iPhone 的時候sim card 是有一張東西貼在上面的..
好像如果用1.1.3 的話，插sim card就再不用貼上那張東西，
也不用再用iWorld 這個軟件。
兼有很多1.1.2 沒有的功能，
所以就想upgrade去1.1.3
我試試講一下steps
看看有沒有問題？
（1）dl 1.1.3 firmware
（2）拔掉sim card，restore iPhone, 然後shift 鍵upgrade 去1.1.3
（3）之後就是一部未unlock, 未activate, 未jailbreak 的iPhone (1.1.3)
（4）關閉iTunes，開Ziphone，按 do it all 將其unlock activate and jailbreak
（5）將沒有貼上東西的sim card 插上，完成！！
iphone reply on March 11th, 2008:
yes 是可以的
完全正確
但會降級 bootloader
February 25th, 2008 at 11:02 pm
Modem Firmware是 04.02.13_G 現在是1.1.2 unlocked 想升1.1.3 要點做 請e_mail me yukafu_fish@yahoo.com.hk
February 12th, 2008 at 9:37 pm
可參看 原文：http://iphone.i-bloog.com/read-61.html
1.1.2 & 1.1.3 Jailbreak + Unlock (3分鐘OK) For Windows
February 12th, 2008 at 9:35 pm
是否安裝Official 1.1.3 Upgrader 先, 然後再由Installer 自動下載 1.1.3 Firmware
February 12th, 2008 at 8:11 pm
你可以用installer內的 soft update to1.1.3
也可以用itunes 按升級,之後用Ziphone 去jailbreak
看首頁吧 ^_^
February 12th, 2008 at 7:55 pm
1.1.2 up to 1.1.3 問題???
Modem Firmware 04.02.13_G
Bootloader Version 4.6_M3S2
本人以SOFTWARE unlook 1.1.2了, 但有什麼方法 up to 1.1.3
February 12th, 2008 at 7:21 pm
可以
但是有部份功能應該不完善
你可以升來玩玩的
February 12th, 2008 at 7:10 pm
1.1.2 up to 1.1.3 問題???
Modem Firmware 04.02.13_G
Bootloader Version 4.6_M3S2
本人以SOFTWARE unlook 1.1.2了, 但有什麼方法 up to 1.1.3
February 11th, 2008 at 1:48 pm
未可以
但nativeCN 的開發人員快發佈新版本了
February 10th, 2008 at 9:21 pm
想問一下…
NativeCn可以用在1.1.3之上嗎??
可以找人測試一下嗎?? =]